The domestic machine tool experience the full impact of the imported products

The domestic machine tool experience the full impact of the imported products

The domestic machine tool experience the full impact of the imported products
“This year, Chinas economic situation is bad, machine tool sales situation was not as good as 2011, some users canceled their orders. Qu Jian said. The frontline sales manager, he has obviously felt the needs of the domestic machine tool users began to shrink as the Dalian Machine Tool Factory. Different days and the tightening of domestic enterprises, the imports of machine tools is still popular in China maintained a rapid growth. The forward-looking data center statistics, January-May 2012, Chinas imports of metalworking machine tools 67373, an increase of 38.1%; imports amounted to about $ 5.31 billion, an increase of 5.1%. 35 795 units in May, imports of metalworking machine tools, imports amounted to $ 1.15 billion, import price storm dropped to a staggering $ 32,000. Chinas machine tool market is changing, a brutal competition in the market is underway. Popular imported machine tools in mid-order disturbing the domestic machine tool companies, an increasing number of imported machine tools is to challenge the market position of the Chinese machine tool enterprises, especially mid-range machines are subject to import machine tools positive sniper. “Chinas high-end machine tools to achieve a breakthrough, the market share of mid-range machine is constantly losing. Shi Yong, director of the Institute of Machinery Industry Information Institute of Strategy and Planning is a little worried, he carefully read the information on hand again, careful to say: “If the statistics are not wrong, then the conclusion is be established. Shi Yong judgment in accordance with the internal data of a blue cover, the data from Chinese customs statistics: 8553 2009 China imported machining center, the amount of imports of $ 1.416 billion, with an average unit price of $ 165,600; 2011 machining center imports up to 40,843 units and imports of $ 4.759 billion and imported machining centers, the average unit price of $ 116,500. The in-house data analysis concluded that: machining centers imported product structure is undergoing significant changes, upscale, expensive machining center imports decreased. In other words, imports of high-end machine to reduce the proportion increase in the proportion of mid-range machine. Imported machine tools menacing, machine tool market fall not only in the end, the number of imports of low-end machine tools market is rising. According to the statistics of the China Machine Tool Association, January to December 2011, the metal processing machine tool imports $ 13.24 billion, an increase of 40.6%. CNC machine tools of $ 11.11 billion, an increase of 42.1%. Remove the $ 4.759 billion, mid-range machine,http://www.china-steel-parts.com. and high-end machine, the low-end machine is poured into the Chinese consumer market. In addition to the export in this way, the cross-machine tool enterprises also plays a game of “winding” means, do “cover” by way of a joint venture with the Chinese machine tool enterprises, joint venture, to participate in the competition of the machine tool market. This relatively hidden way, so that more low-end machine to enter the Chinese market. Worse than the machine tool business feature is to provide supporting services for the machine tool business enterprises, with the fall of the machine tool market, features companies exerted pressure. The import feature good quality, coupled with Chinas implementation of the “key features imported duty-free” policy to allow the import feature to cost increases, the more cost-effective than the use of domestic features, more confidence, and quickly occupied the Chinese machine tool market . In contrast with the fiery situation of imported machine tools, Chinas machine tool companies are to endure the torment of the market downturn. According to the recent China Machine Tool Association survey of 104 enterprises, 52.9 percent of the enterprises in the first half of this year, a year-on-year negative growth, especially in the host enterprise new orders fell significantly. A quarter of the key enterprises in the new orders and orders in hand, year-on-year negative growth year on year decrease of 31.7% and 19.7% respectively. The market potential to attract the world to a large number of imported machine tools is an important reason to enter our country, Chinas rapid economic development makes the machine tool consumption demand. Chinas machine tool consumption for 10 consecutive years of global consumer, a huge machine tool consumption, consumption of many varieties, more than the machine production capacity. Even after the global financial crisis, Chinas machine tool consumption has increased rather than decreased, especially the 4 trillion economic stimulus package to boost domestic demand for machine tools increased, and spawned a large number of advance machine tool consumption, which makes the international machine tool enterprises in China with admiration, “rediscover” the market value of China in the global machine tool consumption. The next five years, greater consumption of Chinese machine tool market momentum. There are forecasts that by 2015, Chinas machine tool industry output value of more than 800 billion yuan. However, Chinas high-end machine tool manufacturing capacity, the most high-end machine tools is completely dependent on imports is an indisputable fact. In the mid-and low-end machine on the market, the China Machine Tool In addition to the price advantage, the accuracy and reliability of processing with imported machine tools is still lagging behind. It is seen that gap, foreign machine tool enterprises began to consciously reduce the price of imported machine tools directly undermine the long-term price advantage of imports of Chinese machine tool products in the low-end machine tools by means of lower prices, narrowing the price gap with the domestic machine tool, especially In May 2012, the average unit price of imported machine tools reached $ 32,000, while the average unit price of the first five months of imports was $ 79,000. Pujiang the prices, market share, rising to become the hot magic of imported machine tools in China market. In addition to the price advantage of imported machine tools, high precision, good stability and efficiency, automation, intelligent advantage beginning to show, gradually attracted the attention of domestic users, thus creating a hot market situation of imported machine tools. The future for high-end technology, when a large number of low-end machine to enter the Chinese market, Chinese machine tool companies need to reflect on how to recoup their weaknesses, and to recapture the machine constantly lost market share. To solve this problem, the only way is filled as soon as possible technical short board to narrow the gap, and reconstruction of the advantages of Chinese machine tool system. Priority, the Chinese machine tool enterprises need to accelerate the pace of independent innovation and technological breakthroughs, the development of Chinas much-needed high-end machine tools, to enhance the technological content and quality of low-end machine. In order to achieve technological breakthroughs as soon as possible, the large Chinese machine tool enterprises to speed up cooperation with foreign machine tool enterprises, joint development of high-end CNC machine tools. Shenyang Machine Tool (000,410, stock it), Mori Seiki, Japan, Germany GILDEMEISTER reached a cooperation, establish joint ventures in Shenyang, claiming that the new products focused on the development of high-end market. Jinan Machine Tool Group and Italy Pitt – Carnegie AG joint venture, the joint manufacture of high precision CNC vertical lathe, milling complex machining centers. However, the past few years, cross-border machine company not too many new and high-end machine tools in China, company production, but the layout of the low-end products to participate in market competition in China. Shi Yong think. In addition to their own efforts, China has also introduced a number of policies and measures to promote the rapid development of domestic machine tool, in order to achieve this breakthrough as soon as possible, the State Ministry of Industry has set up a high-end CNC machine tools and basic manufacturing equipment technology major projects, focusing on R & D is difficult to imported from abroad or foreign to the Chinas exports of machine tools. Machine tool industry in the second Five-Year Development Plan also proposed: “must be based on independent innovation, independent research and development of original innovation, the introduction of technology absorption and innovation, integration of existing technology and innovation to achieve breakthroughs in key technologies and industrial upgrading, & rdquo ; the development of ideas. “To promote the rapid development of Chinas machine tool industry, user and host to support each other, help each other and have a strategic vision, national interests first. “High-end CNC machine tools and basic manufacturing equipment technology major projects the overall group of experts recommended that Chen Xiaoming,” In addition to the host enterprise and system features enterprise in close collaboration with the component level or asset level of cooperation, alliances, restructuring, to respond to market competition, to build brands, increase market share. “


Tags:
Warning: scandir(): open_basedir restriction in effect. File(/home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/../../../../) is not within the allowed path(s): (/home/wwwroot/www.china-steel-parts.com/:/tmp/) in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: scandir(/home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/../../../../): failed to open dir: Operation not permitted in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: scandir(): (errno 1): Operation not permitted in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: Invalid argument supplied for foreach() in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 42