Metal cutting tool consumption in China to maintain sustained growth trend



Metal cutting tool consumption in China to maintain sustained growth trend

2011 years of metal cutting tool consumption in general, largely continues the trend of growth in 2010, an increase in the total. It is estimated that Chinas 2011 tool consumption is about 39 billion yuan, an increase of approximately 13% in 2010; which domestic consumption tool of about 27 billion yuan less than 4 percent growth over 2010; and consumption of imported knives about 12 billion yuan, an increase of approximately 25% compared to 2010.
But from the consumption structure analysis, we will find that the consumption structure of Chinas domestic tool has many problems.
In the worldwide industry, tool consumption ratio is about 35%: high-speed steel cutting tools, diamond and cubic boron nitride cutting tools accounted for 10%, while the welding of carbide cutting tools, solid carbide and indexable Carbide accounted for the rest.
In the tool industry in China is not the case. Tool Chapter 2010 Machine Tool Industry Association member companies of domestic sales statistics, Chinas domestic consumption, domestic knives, about 69 percent of high-speed steel cutting tools, carbide cutting tools account for only about 28% (the rest of the system as a tool, diamond and cubic boron nitride cutting tools, etc.). Even with the import tool in our tool consumption, about 53% for high-speed steel cutting tools, carbide cutting tools for 45%, diamond and cubic boron nitride cutting tools account for only 2%.
This ratio shows that even though China has become the worlds first large-scale machine tool consumer and the same is the worlds first large-scale tool consuming countries, but our tool consumption structure can not even reach the world average. Our current situation is: the rate of NC machine tool production machine tool output value of NC rate has gradually increased, but the trend of lower average selling prices of the machine, we can see our CNC machine tools may or Simple NC play a leading role. This means that the overall level of Chinas metal cutting is not high.
The overall processing level is not high status and escalating labor costs and the yuans appreciation trend, hidden Made in China gradually lost its competitive risks, including some economists, including the United States and entrepreneurs are considering some manufacturing enterprises have been moved to Asia to move back to their home.
Make us continue to attract global companies to the manufacturing floor in China, we need to improve competitiveness, including, of course improve the manufacturing level. In fact, this point, I believe that is also in line with the requirements of the CPC Central Committee on the changing patterns of development during the “12th Five-Year, that is to be severely the number of low-value, high consumption of the manufacturing industry, to re-level, high added value, green manufacturing.
I had mentioned in a text tool technology and market in the manufacturing technology of the tool,forged. tool material technology. Tool material technology is expected to develop new types of materials and high performance in both directions of the original material. On the cutting tool industry in China is extensive use of high-speed steel cutting tools, although in the short run this tool material is not the demise of the possibility of upgrading equally necessary.
For example, if we use the high speed steel and cobalt-containing and even to the powder metallurgy high speed steel (P / MHSS) to replace the now commonly used in ordinary high-speed steel, high-speed steel cutting tools and manufacturing standards can also to a higher level. Developed countries in Europe and the United States since the 1970s, the market share of high-speed steel cutting tools carbide cutting tools eroded. With the advent of powder metallurgy high speed steel cutting tools, high-speed steel cutting tools market share has rebounded. This is because the powder metallurgy high speed steel cutting tools with the ordinary high-speed steel cutting tools, hardness, toughness, better and more wear-resistant and therefore are more welcomed by users. Processing where applications such as high impact, large resection, powder metallurgy high speed steel cutting tools than ordinary old model brittle carbide is small, less prone to fragmentation, therefore, in turn, replaced part of the carbide tool. But our tool industry long-standing good use of powder metallurgy high speed steel to manufacture the tool, so the low level of high speed steel cutting tools, it goes without saying that. Until recently, I heard the plan of the River Metallurgical Group and Jiangsu Heavenly has the development of powder metallurgy high speed steel, well implemented, more hope that the existing high-speed steel cutting tools manufacturers to change the way of the development, production and promote more welcomed by users of powder metallurgy high speed steel cutting tools products.
In addition, the same in the high-speed steel cutting tools, our high-speed steel tool manufacturers also belong to a mighty force in single – most of the production capacity in the manufacturing of high-speed steel drilling tool. Tool consumption in Germany in 2006, the consumption of high-speed wire cone value higher than the value of the consumption of high-speed steel drill bit, and our high-speed steel hole cutting tools made knives consumption is about four times the consumption of high-speed steel threaded tool.model castings. According to the author, this is not to say that the demand for high-speed steel threaded tool is small, but because of the relatively simple manufacturing of high speed steel cone manufacture than high speed steel drills, tap the requirements are relatively high requirements, the application of complex, many of the domestic tool manufacturers to tap the manufacture and sale of services is far from being able to meet domestic consumer demand, resulting in the consumption of tap domestic consumption similar to the carbide cutting tools to rely more on international manufacturers in China. This point, the tap from Japan to manufacture and sale of an expert OSG sales situation can be confirmed.
Our domestic tool manufacturers in order to gain a place in the competition with international manufacturers, the emphasis on user experience is a must do. In my opinion, many of our domestic tool manufacturers in all aspects of product development, production, sales, service, etc. there are not pay enough attention to user experience.
I visited several domestic tool manufacturing enterprises, including both the old state-owned large tool companies, but also sales of the leading joint-stock enterprise, there are some private enterprises, when they introduce their company to the user, more often than not Introduction to home can provide users with what kind of service, to address what kind of problems for users, but the emphasis on what kind of equipment will often equipment manufacturers and device models are introduced one by one. Reality, most users do not understand what the manufacturers of these devices. I served eight years in the Walter tool, until the day of leave Walter, the blade of the companys production equipment can be said to know nothing about. But I know they give the user what kind of solutions to help users improve productivity, and help users to reduce production costs. I know What are the characteristics of their products, depending on the conditions of use of the select what kind of tools, as well as how to properly use these tool. In the communication process with many users, I clearly know that these are a lot of users really want to know something. I can honestly tell you that has never been a user to find out my Walter blade is produced with what manufacturers and models of equipment, like almost everyone with a cell phone, these phones use equipment production , we may know nothing about. If our tool manufacturers indulge in their own world, keen to own what device complacent To this end, without the emphasis on user experience, according to the needs of users to develop, manufacture, sell products, we can hardly in the competition to get their own place in the world.



Tags:
f