Domestic hardware tool relatively isolated competitiveness to be improved

Domestic hardware tool relatively isolated competitiveness to be improved

Domestic hardware tool relatively isolated competitiveness to be improved
the

According to the data, last year China imported a total of all kinds of tool products twenty-three thousand three hundred sixty-four 64 percent increase over the previous year; import tool purchase costs of up to two $ 285 one hundred six U.S. dollars, an increase of 87 percent over the previous year. These figures show that domestic knives also lags far behind the development of the host machine, so the current selling situation “foreign knife. The market trend of economic globalization is even more significant today, a clear gap with the international advanced level, identify the metal tool manufacturing industry development trend and catch up, it becomes very important.

China has become a world manufacturing plant “, this is just some bulls estimated. At present, the main force of Chinas manufacturing industry is still focused on the ability to engage in processing, the independent production of highly sophisticated technical products is not strong, the overall competitiveness to be improved.

compared with international standards, where is the gap?

According to expert analysis, the gap between our stage. Mainly in the manufacturing sector is still low-end manufacturing-based, value-added products is not high,china sourcing. only 26.23%. As a major exporter of export goods is labor-intensive products with low technological content. At the same time, the energy consumption of Chinas manufacturing industry is higher than 20% to 30% of the international advanced level.

the

enter the new century, since with the manufacturing sector of developed countries, large-scale transfer to China, the domestic manufacturing industry has also accelerated the pace of technological transformation, so the domestic CNC The machine began to enter the manufacturing field. Followed by a sharp contradiction quickly emerged from the water, advanced CNC machine tools, with less than a state-of-the-art domestic knives, but with the “foreign knife. Chinese tool industry for decades, the product structure in the new period of development has finally exposed the serious flaws, drag the hind legs of manufacturing modernization.

how to solve the gap, accelerating industrial development?

tool enterprises and multinational advanced tool enterprises, from the capital, technology, equipment and management level, there is a big gap, it seems to find no advantage. But I think, at least two major advantages is a valuable tool of industrial development in China. That is: natural and human resources. Unfortunately, these two resources have not been very good to use and grasp, lost a lot of opportunities for development.

the

of tool material resources are unique. In 2003 China produced 60,000 tons of high-speed steel, carbide 12,500 tons, accounted for about 40 percent of the worlds total. However, the same year, our tool sales, less than 6% of the global tool sales, this great contrast is shocking. Description of tool value of the products is too low.

in human resources tool industry in China for decades to cultivate a well-educated workforce. Although the impact of Chinas industrial base level knowledge obsolete, and need to update and improve. This step is difficult to catch up. Many foreign-funded enterprises from the Chinese tool enterprises employ a large number of personnel,hose and fittings. training can be quickly adapted to the modern tool of production, marketing and services, and a very good job, to prove the ability of the team. However, our tool long-term production of the monotony of standard products, the teams development potential and potential wasted, this is a great pity.

So, how can we give full play to our advantages in resources and manpower advantage, the industrial development of the tool to a new level? Experts believe that we should first change their ideas to strengthen the service to start. The tool completely lost for decades to develop the monotony, so whats selling Hans old habits, to meet the needs of the manufacturing sector in the first place. Set the guiding ideology and approach to development, even without a lot of modern equipment, can produce good products with users. With this guiding ideology, shoddy waste of resources, unconventional and a waste of talent, would be greatly reduced. In recent years, tool industry began to emerge a number of science and technology private enterprise, is one such development, its growth rate exceeds the force of the state-owned enterprises, and worthy of attention.

the

tool industry to address the subject of modernization, enhance service awareness, and improve service levels is the most important, the urgency is far more than the improvement of equipment. We had a lot of hard lessons, some companies pay big bucks to the introduction of foreign advanced equipment, old ideas have not changed, still the production fits the standard tool, the results from the market.

todays modern tool manufacturing industry in developed countries, after since the 1980s, mergers, restructuring, and improve, showing a high starting point, large investment, the scale , internationalization “of the characteristics and concentration trends. 10 largest multinational Tool Group, occupies two-thirds share of the international tool market. Tool enterprises in China compared, regardless of product development capabilities, process development, equipment development capabilities and marketing services are a big gap. It must be acknowledged that this gap is not an overnight to catch up with them. Tool industry, after all, is a traditional industry, and high-tech development in the law is not the same. A lot of skills and experience to rely on a long-term process of accumulation.

tool industry in China in recent years of reform and development, but also began to notice their own conditions, accurate positioning, select a reasonable model of development issues. Many large and medium-sized enterprises, have abandoned the “large” small but complete model of development is beginning to show their own characteristics, this is a very welcome phenomenon. But the proportion of specialty products and services is not big enough, the transformation is not fast enough. Description of a sense of urgency is not strong, not completely free from the influence of the traditional system, will also accelerate the pace of reform.

in the competition of market economy, enterprises are the subject of the competition, it must be responsible for their own survival and development. Therefore, the development of the tool industry in China can not meet the needs of the manufacturing sector, first of all from the enterprise itself to find a cause and come up with solutions. But on the other hand, it must be noted that the history of the development of Chinas market economy is still very short, there are many non-standard and imperfections in the operation of the market, affecting the healthy development of enterprises, sometimes very serious. Must Yao Zheng, enterprise communication, consensus, by the government stepped in to resolve. For example, for many years hampered the healthy development of the tool industry “low-quality low-priced products vicious competition” and “unfair investment-oriented. These two issues, and government action have a direct relationship.


Tags:
Warning: scandir(): open_basedir restriction in effect. File(/home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/../../../../) is not within the allowed path(s): (/home/wwwroot/www.china-steel-parts.com/:/tmp/) in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: scandir(/home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/../../../../): failed to open dir: Operation not permitted in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: scandir(): (errno 1): Operation not permitted in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: Invalid argument supplied for foreach() in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 42