Domestic hardware manufacturing carbide cutting tools accounted for 50%

Domestic hardware manufacturing carbide cutting tools accounted for 50%

Domestic hardware manufacturing carbide cutting tools accounted for 50%
consumption tool of the

domestic hardware manufacturing, the proportion of carbide cutting tools has reached more than 50%, has very serious problems of supply and demand structure out of line. The consequences of a large excess of high-speed steel cutting tools, low-cost export or domestic sales, while efficient carbide cutting tools have to rely on importing large quantities of imports from the $ 090 million in 2001 rose to $ 450 million in 2005 (about 3.6 billion yuan).

In developed countries, carbide cutting tools account for the dominant position of the tool, the proportion of 70%. High-speed steel cutting tools is to reduce the rate of 1% to 2% per year, the proportion has dropped to below 30%. The proportion of diamond, cubic boron nitride and other superhard tool for about 3%.

our tool sales of $ 14.5 billion, of which less than 25% the proportion of carbide cutting tools, not only with the product structure of the international market tool, far from , we can not meet the growing demand of domestic manufacturing of carbide cutting tools.

our current annual output of about 80,000 tons of high-speed steel, accounting for 40 percent of global output,link seal. consume a great deal of valuable scarce resources such as tungsten, molybdenum. This blindly repeat expansion and a low level, making the production of high-speed steel cutting tools, a large surplus, had low sales, resulting in a large number of tool manufacturers with low efficiency.

Chinas current annual output of 16,000 tons carbide, accounting for about 40 percent of global output. However, the cemented carbide products in the highest value-added cutting blade production is only three thousand tons, accounting for only 20%. This situation, on the one hand caused by the lack of badly needed supply of carbide cutting tools, on the other hand, the carbide resources underutilized.

from the cost-effectiveness comparison of cemented carbide with annual sales revenue of approximately $ 560 million; only 40% of our production in Japan, but sales revenues of $ 2.633 billion dollars, which up to 72% the proportion of the blade (tool), so that resources are fully utilized, companies also get good benefits. Tool Industry in China should get some useful inspiration.

Currently: tool tool structural imbalance is the production of and demand wrong way. For example: a large gap of carbide cutting tools by the user, but the high-speed steel cutting tools overproduction; modern manufacturing urgently needed efficient tool gap, but low-grade standard tool is overproduction.