CIMES 2012 exhibition preview metal cutting machine tools Department of Fair Preview

CIMES 2012 exhibition preview metal cutting machine tools Department of Fair Preview

CIMES 2012 exhibition preview metal cutting machine tools Department of Fair Preview
the

by the China National Machinery Industry Corporation, China National Machine Tool Corporation jointly sponsored by the Eleventh China International Machine Tool & Tools Exhibition (CIMES 2012) June 12-16 this year is about to again the grand debut of the new China International Exhibition Center. After 20 years the industry has accumulated and market impact of the current CIMES will meet from China, the United States, Germany, Italy, Britain, France, Sweden, Japan, South Korea, Spain, Finland, Czech Republic, Israel, Turkey, China, Hong Kong SAR, Taiwan region the feast of the more than 1,300 exhibitors in 28 countries to bring the machine tool industry,delta power supply. nearly 3,000 pieces (sets) of exhibits, including metal cutting machine tools, automation control and power transmission, metal forming machine, special machine tools and special equipment, tools , functional components, modules and attachments. Expected to have 10 sets of metal cutting machine tools, metal forming machine tools and thousands of pieces of tool numerical control system, features and other products will be rendered at the scene, the exhibition area will reach 120,000 square meters. By then, the expected audience of more than 70 countries and regions will visit CIMES2012 show the total visitors is expected to exceed 55,000 people.

the

Hamer processing center W1-B601

the

headquarters was established in 1938, Germany Hammer The company has gradually developed into a high-end five-axis machining centers and automated production unit R & D, manufacturing, suppliers. Wide range of product applications, mold manufacturing, aerospace, medical equipment, shipbuilding industry and other industries can develop their potential. Hammer based in Germany, global radiation, to ensure that the products offered by all of the real German production.

exhibition C30U 5-axes machining center is a classic model of Hammer XYZ travel, respectively, 650-600-500mm, selection the Heidenhain iTNC530 operating system. Demo machines matching 18000rpm spindle and HSK-A63 tool holder, and a diameter of 600mm, NC rotary swing table, swing angle of +30 ° / -115 °. C30U in the field of metal processing, especially for medium-sized complex parts production, the challenges of difficult to machine materials ease, high rigidity and dynamic to ensure optimal accuracy and efficiency.

Germany Bei Tuote? Hamer machinery AG Shanghai Representative Office

,, Tel: +86-21-2281 9188 Fax: +86-21-6427 1887

E-mail: hermlesha@126.com

the

URL: www.hermle.de

De guitar metal processing machine W1-B001

the

DMG will show the audience the 10 balance represents the latest processing technology, machine tools, including 4-axis milling machining center, 5-axis universal machining centers, milling cars milling centers, efficient drilling and milling machining centers, horizontal machining center and the new design ECOLINE universal lathes,soil pipe. universal milling machines and vertical milling machining center.

which the new CTX series by virtue of the new type of the CTX a beta 1250 TC 4A machine opened up a 4-axis turning the production of new areas. With milling spindle speed of 12,000 rpm, under the turret with sub spindle B-axis, can be used as a surface or axis machining torque motor with 24 knife tool magazine. Provides sufficient flexibility for its innovative programs for a variety of different requirements, technical configuration can be changed according to the actual application requirements, can be widely used in drive technology, automotive industry, machinery manufacturing, and so on.

jointly developed by DMG / MORISEIKI and tapping center provides a number of improvements of MILLTAP 700 for the processing of complex small and medium-sized parts and R & D . Its advantage lies in the mass production of the field (from a single machine to a fully automated production) performance, reliable and efficient diversification of processing. Which machine covers an area of ​​only 4m2, spacious and processing, the maximum work of formation of the smallest maximum countertops; bed is very sturdy, better rigidity and stability to ensure a perfect surface quality, high machining accuracy and contour accuracy; rapid traverse and feed rate of up to 60 m / min; speed of 10,000 rpm (standard) and 24,000 rpm (optional) high-tech spindle; auxiliary time is short: the debris – chip time of 1.1 seconds; with 3D programming software, Siemens 840D solutionline CNC system, built-in tool management system; high energy efficiency: reducing energy consumption, the maximum decrease of 30%; to provide a variety of expansion option to meet the multi-axis machining and automated processing.

the

new design ECOLINE universal milling efficiency is extremely high, suitable for five-sided machining from simple to complex workpiece; space covers an area of ​​excellent, NC swivel rotary table processing areas are spacious, smooth; NC swivel rotary table with digital drives and direct the formation of the measurement system, optional air-sealing technology to achieve the best accuracy; with a torque of 83 Nm, speed is the powerful 8,000 rpm milling spindle matching for a fast 10,000 rpm spindle speed ensures efficient processing at all stations; standard with 16 knife pick-up tool magazine to the spindle feed, if necessary, can be supplied with 30 knife tool magazine in order to optimize the flexible and increase productivity.

DMG

Tel: +86-21-6764 8 876

the

Fax: +86-21-6763 9033

Email: info@dmg.com

the

website: www.dmgchina.com


Tags:
Warning: scandir(): open_basedir restriction in effect. File(/home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/../../../../) is not within the allowed path(s): (/home/wwwroot/www.china-steel-parts.com/:/tmp/) in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: scandir(/home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/../../../../): failed to open dir: Operation not permitted in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: scandir(): (errno 1): Operation not permitted in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 40 Warning: Invalid argument supplied for foreach() in /home/wwwroot/www.china-steel-parts.com/wp-content/themes/WPTradeC-en/footer.php on line 42